EXABYTE CORPORATION

EXB-4200, EXB-4200C

Device Type             Tape Drive
Interface               SCSI, SCSI-2
Format                  DDS-1

                        DDS-DC (EXB-4200C only)
Sustained Transfer Rate 234KBPS

                        467KBPS (EXB-4200C compressed only)
Size                    3.5 in. half height
View                    Top


                                CONNECTIONS

        Function           Label             Function             Label

  Ground connector          CN1      Monitor port (pin-out         CN2
                                     unidentified)

                        USER CONFIGURABLE SETTINGS

               Setting                       Label           Position

  »   SCSI-1 Mode enabled               JP1/Pins 7 & 8        Closed

      SCSI-2 Mode enabled               JP1/Pins 7 & 8         Open

                            DRIVE SELECT ID

     Drive ID      JP1/Pins 1 & 2    JP1/Pins 3 & 4    JP1/Pins 5 & 6

        0               Open              Open              Open

        1              Closed             Open              Open

        2               Open             Closed             Open

        3              Closed            Closed             Open

        4               Open              Open             Closed

        5              Closed             Open             Closed

        6               Open             Closed            Closed

        7              Closed            Closed            Closed

                      MANUFACTURERS RECOMMENED MEDIA

      Drive            Tape         Capacity Without      Capacity With
                                      Compression         Compression

    EXB-4200        EXATAPE® 90          2.0GB                N/A
                    meter DDS-1

    EXB-4200C       EXATAPE® 90          2.0GB                N/A
                    meter DDS-1

    EXB-4200C       EXATAPE® 90          2.0GB               4.0GB
                   meter DDS-DC


                             DIAGNOSTIC LED(S)

    LED        Color         Status                 Condition

   LED1        Green           On                Drive power on

   LED1        Green          Off                Drive power off

   LED2        Orange          On         Data commands being processed

   LED2        Orange         Off            Data commands not being
                                                    processed

   LED3        Yellow          On            Drive requires cleaning

   LED3        Yellow         Off        Drive does not require cleaning

  Note: When all LEDs are blinking, drive error has occurred. Power drive
  off, then on again. If LEDs continue to flash technical support is
  required.